Mailcurrentsensor@126.com
Phone+8613701518500
enLanguage
  • English
  • Português
  • Deutsch
  • Français
  • русский
  • Italiano
  • 日本語
  • عربي
  • Español
RectangleWuxi Liou Electronics Co., Ltd.
Nav
  • Advanced Search
  • Home
  • About Us
    • Our History
    • Our Certificate
    • Production
  • Products
    • Center Through Hole(Split Core)Current Transformers
    • Split Core Current Transformers
    • Residual (Zero Sequence)Current Transformer
    • Antenna Used for Automobile
    • General Used Current Transformer
    • DC Immune Current Transformers
    • Center Throughcurrent Transformer
    • Hall Effect Sensor
    • Three Phase Current Transformer
    • High Frequency Current Transformer
    • Digital Meter Current Transformers
    • Electricity Meter Current Transformer
    • Planar Transformer
    • High Frequency Switching Power Transformer
    • Flexible Rogowski Coil Current Sensor
  • Video
  • Case
    • Generator earthing and stator earth fault protection
    • Zero sequence current transformer in relay protection applications
    • Hall current sensor IC used for EV charger
  • News
  • Knowledge
    • Current transformer design information
  • Contact Us
  • Feedback
  • Blog
Search
Banner
Home /

Knowledge

hot knowledges
  • How to determine if the Hall Effect Sensor is damaged?

    How to determine if the Hall Effect Sensor is damaged?

    DateJul 15, 2026
  • How to wire a current transformer

    How to wire a current transformer

    DateJul 13, 2026
  • What are some methods to dry current transformers?

    What are some methods to dry current transformers?

    DateJul 10, 2026
CONTACT US
  • Location1Zhuqingzhuang Industrial Park, Donggang Town, Xishan District, Wuxi, Jiangsu, China
  • phone1+8613701518500
  • phone1+8615371097096
  • mail2currentsensor@126.com
  • What are the consequences of using an unsuitable current transformer?
    Date2026-6-17

    What are the consequences of using an unsuitable current transformer?

    1. Consequences of Measurement and Metering: Accuracy Deviation Leading to Economic Losses Different types of mismatches can lead to inaccurate metering: Matching Transformer Ratio Settings: A high tr
  • How to Determine if a Current Transformer is Suitable
    Date2026-6-15

    How to Determine if a Current Transformer is Suitable

    I. Selection Parameter Matching Judgment (Basic Judgment) First, verify that the core selection parameters match the actual scenario requirements. Any mismatch indicates unsuitability: 1. Current Rati
  • What tests are needed after replacing a current transformer?
    Date2026-6-12

    What tests are needed after replacing a current transformer?

    I. Transformer Ratio and Polarity Test (Core Function Verification) Apply a test current using a transformer ratio and polarity tester to measure the secondary output. Transformer Ratio: The measured
  • How to safely replace a current transformer after it is damaged
    Date2026-6-10

    How to safely replace a current transformer after it is damaged

    I. Power Deactivation and Safety Isolation Disconnect Primary Power Supply: Disconnect the upstream circuit breaker or isolating switch to ensure no power is supplied for work. Hang Warning Signs: Han
  • Emergency Handling of Current Transformer Installation Errors
    Date2026-6-08

    Emergency Handling of Current Transformer Installation Errors

    I. Immediate Power Disconnection and Warning Setup Upon discovering an installation error (such as reverse meter rotation, protection tripping, or negative meter reading), immediately disconnect the p
  • How to avoid incorrect installation of current transformers
    Date2026-6-05

    How to avoid incorrect installation of current transformers

    1. Prevent Reversed Polarity and Direction P1 must face the power supply side (e.g., transformer or incoming line), and P2 must face the load side. On the secondary side, S1 is connected to the instru
  • Common Mistakes in Current Transformer Installation
    Date2026-6-03

    Common Mistakes in Current Transformer Installation

    I. Secondary Side Open Circuit (Most Dangerous) Incorrect Manifestations: Installing switches or fuses on the secondary circuit, or loose wiring leading to an open circuit during operation. Consequenc
  • What precautions should be taken when installing current transformers?
    Date2026-6-01

    What precautions should be taken when installing current transformers?

    1. Polarity and Direction Must Be Correct: The primary side terminals are marked P1 and P2. Current should flow into P1 and out through P2. P1 must face the power supply side (e.g., transformer or inc
  • What are the consequences of incorrect current transformer (CT) direction?
    Date2026-5-29

    What are the consequences of incorrect current transformer (CT) direction?

    I. Impact on electricity metering Reversed or under-counted electricity: Incorrect direction causes a 180° phase reversal of the secondary current, resulting in an incorrect direction of active po
  • What are the effects of reversing the direction of a current transformer (CT)?
    Date2026-5-27

    What are the effects of reversing the direction of a current transformer (CT)?

    I. Impact on electricity metering Reversed or negative display of the electricity meter: Reversed connection reverses the phase of the secondary current by 180°, resulting in an incorrect directio
  • How to Determine if a Current Transformer is Connected in the Wrong Direction
    Date2026-5-22

    How to Determine if a Current Transformer is Connected in the Wrong Direction

    I. Observation Method: Check the direction of P1/P2 terminals The primary side of a current transformer is marked with terminals P1 and P2. During normal operation, current should flow into P1 and out
  • What are the consequences of reversing the direction of a current transformer...
    Date2026-5-25

    What are the consequences of reversing the direction of a current transformer...

    I. Impact on electricity metering Reversed or negative display of electricity meter: When the current direction is reversed, the secondary current phase reverses by 180°, resulting in an incorrect
First 1234567 Last 2/104

Contact Us

  • LocationZhuqingzhuang Industrial Park, Donggang Town, Xishan District, Wuxi, Jiangsu, China
  • Phone+8613701518500
  • Eail1currentsensor@126.com

Quick Navigation

  • Home
  • About Us
  • Products
  • Video
  • Case
  • News
  • Knowledge
  • Contact Us
  • Showroom
  • Feedback
  • Blog
  • Sitemap

Categories

  • Center Through Hole(Split Core)Current Transformers
  • Split Core Current Transformers
  • Residual (Zero Sequence)Current Transformer
  • Antenna Used for Automobile
  • General Used Current Transformer
  • DC Immune Current Transformers
  • Center Throughcurrent Transformer
  • Hall Effect Sensor
  • Three Phase Current Transformer
  • High Frequency Current Transformer
  • Digital Meter Current Transformers
  • Electricity Meter Current Transformer
  • Planar Transformer
  • High Frequency Switching Power Transformer
  • Flexible Rogowski Coil Current Sensor

inquiry

For inquiries about our products, please leave your E-mail to us and contact us within 24 hours.
inquiry now
Copyright © Wuxi Liou Electronics Co.,Ltd All Rights Reserved.