-

2026-2-04How long is the lifespan of a Hall effect sensor?
I. Factors Affecting Lifespan 1. Environmental Corrosion High Temperature: Long-term operation above 85℃ will accelerate aging; the lifespan of silicon-based components may be reduced from 5 years to -

2026-2-02How to determine if a Hall Effect Sensor is working properly?
I. General Testing Steps 1. Power Supply Check Use a multimeter to measure the power supply line voltage (e.g., the red and black wires of the Hall effect sensor wiring in an electric vehicle). It sho -

2026-1-30Do current transformers need recalibration after compensation?
I. Why is recalibration necessary? 1. Compensation changes parameters: Turnings compensation adjusts the number of turns in the secondary winding, directly affecting the turns ratio and error. Capacit -

2026-1-28How to test the error of a current transformer after compensation?
I. Test Method Selection 1. Comparison Method Operation: Simultaneously energize a high-precision standard current transformer and the current transformer under test, and read the error value using a -

2026-1-26Common Errors in Current Transformer Compensation
I. Errors in Compensation Calculation Turns Compensation: Calculating a -0.5% ratio difference as -1% may lead to excessive secondary current, increasing the error. Capacitor Compensation: Using a 50& -

2026-1-23What are the precautions for current transformer compensation?
I. Accurate Compensation Calculation Turnings Compensation: The number of compensation turns must be accurately calculated based on the actual ratio difference to avoid over- or under-compensation. Fo -

2026-1-21Common Errors in Current Transformer Error Compensation
I. Errors in Compensation Calculation 1. Deviation in Turns Compensation Calculation Error Manifestation: Failure to accurately calculate the number of compensation turns based on the actual ratio dif -

2026-1-19How to determine if a current transformer is qualified?
I. Error Limits Ratio difference (current error): The actual value must not exceed the limit specified for the accuracy class. For example, the ratio difference of a 0.5 class transformer must be with -

2026-1-16How to determine if a current transformer needs compensation?
I. Does the error exceed the limit? Ratio difference (current error): If the actual ratio difference exceeds the limit specified for the accuracy class (e.g., for a 0.5 class transformer, the ratio di -

2026-1-14What are the methods for compensating errors in current transformers?
I. Magnetomotive Force Compensation 1. Turns Compensation Principle: Reducing the number of turns in the secondary winding increases the secondary current, compensating for the ratio difference. Formu -

2026-1-12How to determine if a Hall sensor is damaged?
I. General Testing Methods 1. Multimeter Voltage Test Use a multimeter to measure whether the power supply voltage is normal (e.g., 5V or 12V), and then measure whether the signal line voltage changes -

2026-1-09How to prevent damage to Hall effect sensors?
I. Electromagnetic Interference Protection 1. Hardware Shielding: Choose an aluminum alloy or stainless steel casing (thickness ≥ 1.5mm), and seal the seams with conductive adhesive. This can block


