-

2024-8-21How to judge the performance of Hall effect sensors?
1. Appearance inspection: Check whether the sensor housing is damaged or scratched, and whether the pins are intact, not bent or broken. 2. Voltage measurement: Use a multimeter to measure the power s -

2024-8-19What factors should be considered when selecting a Hall effect sensor?
1. Measurement range Clarify the range of magnetic field strengths to be measured, and ensure that the selected sensor can cover this range and has good accuracy and linearity within its range. 2. Acc -

2024-8-16How to choose the right Hall effect sensor?
1. Measurement type: Determine whether you need to measure position, speed, current, etc. For example, position sensors usually operate in on/off mode to detect the occurrence of magnetic fields; line -

2024-8-14How to check the preheating status of the measuring equipment and the current...
1. Observe the equipment indicator light Some measuring equipment and current transformers may be equipped with an indicator light. When the preheating is completed, the indicator light will show the -

2024-8-12What should be paid attention to when measuring the error of current transfor...
1. Environmental conditions The measurement should be carried out under stable ambient temperature and humidity conditions to avoid the influence of drastic changes in temperature and humidity on the -

2024-8-09How to reduce the error of current transformer?
1. Optimize core material and design Choose core materials with high magnetic permeability and low loss, such as ultra-fine crystal alloy. Reasonably design the shape and size of the core to reduce th -

2024-8-07How to judge whether the accuracy of the current transformer meets the requir...
1. Standard instrument comparison Use a high-precision standard current transformer to compare and measure with the current transformer being tested. Under the same primary current conditions, compare -

2024-8-05What are the factors that affect the accuracy of current transformers?
1. Core saturation When the primary current is too large and exceeds the rated current of the transformer to a certain extent, the core will enter a saturated state, resulting in a decrease in magneti -

2024-8-03How to choose a current transformer with the right accuracy level?
1. Measurement or protection requirements If it is used for high-precision measurements such as energy metering, a current transformer of level 0.2 or 0.5 should be selected. For general measurement p -

2024-8-01What factors will affect the accuracy of the current transformer?
1. Excitation current The core of the current transformer will generate excitation current when it is working. When the excitation current is too large, it will cause the measurement error to increase -

2024-3-25How the residual current transformer works
A residual current transformer is a device used to detect earth faults in power systems. Its working principle is based on the principle of current transformer. In power systems, when a ground fault o -

2024-3-22Application fields of residual current transformers
1. Ground fault protection: Residual current transformers can be used to detect ground faults in power systems. When a ground fault occurs in the system, the residual current transformer can detect th


