-

2023-11-01Several methods for dealing with oil leakage from current transformers
1. Poor quality or oil leakage from welding For example, if the oil conservator has trachoma or welding oil leakage, sealing glue or electric welding must be used. In order to prevent the chromatograp -

2023-10-30How to identify the quality of current transformer?
First answer For high-voltage current transformers: The secondary circuit of the current transformer can only carry a small impedance, so it tends to be in a short-circuit state during normal operatio -

2023-10-27Principles for Selection and Inspection of Current Transformers
1) The rated voltage of the current transformer is not less than the rated voltage of the line at the installation point 2) Calculate current IC and select current transformer changes based on primary -

2023-10-25Zero sequence current transformer selection
1. At present, most of the small current grounding line selection detection components in projects are selected according to the protection level. When the measured current of the protection level tra -

2023-10-23What is the difference between current transformer for measurement and protec...
Current transformer, whose English name is Current transformer and whose symbol is TA, is an instrument based on the principle of electromagnetic induction and composed of a closed iron core and windi -

2023-10-20How to install and regulate current transformers
1. The metal frame on which the current transformer is installed (such as the busbar frame in the distribution cabinet) must be solid, and the exposed metal part of the transformer shell must be relia -

2023-10-18Appearance inspection of current transformer
The current sensor under test must be fully inspected. When the current sensor under test has the following defects, it must be repaired before verification: 1) No nameplate or lack of necessary signs -

2023-10-16Current transformer troubleshooting
(1) To effectively solve the problems existing in the transformer, the first thing to change is the environment. It cannot be placed in a humid environment, and then the transformer is replaced. The s -

2023-10-13Causes of current transformer failure
1. Structure Usually, when the voltage is higher than 32kv, the materials used to make the internal structure of the transformer generally use thin paper insulating materials, and when the voltage rea -

2023-10-11Principles for the installation and selection of current transformers
1. Primary side rated current For the selected current transformer, the rated current on the primary side should be 1.0 to 1.3 times the load current during normal operation of the line. 2. Rated volt -

2023-10-09Why should the secondary side of the current transformer not be open-circuite...
(1) The secondary side of the operating current transformer must not be open-circuited for the following reasons: When the current transformer is operating normally, since the secondary side load impe -

2023-10-06The treatment method when the secondary side of the current transformer is op...
(1) Find out which group of current loops and open circuits of the current transformer the fault belongs to, and whether it will affect the relay protection device. Report to dispatch and exit protect


