-

2023-4-28Installation Specifications for Current Transformers
1. The installation of the current transformer must be firm, and the metal exposed part of the transformer shell should be reliably grounded. 2. The same group of current transformers should be instal -

2023-4-26Patrol Inspection of Current Transformer Operation
(1) Check that the porcelain part should be clean, free from damage, cracks, and discharge traces. (2) Check that the oil level should be normal, the oil color should be transparent and not black, and -

2023-4-24Permissible operating modes of current transformers
(1) Allowable operating capacity. The current transformer should operate within the rated capacity specified on the nameplate. If the operation exceeds the rated capacity of the nameplate, the accurac -

2023-4-21The reason why the secondary side is not allowed to open circuit when the cur...
⒈The magnetic potential I1N1 of the measured current of the current transformer once causes the magnetic flux Φ1 in the transformer iron core ⒉Current transformer secondary detection instrument curren -

2023-4-19What aspects should be paid attention to when applying transformers?
1. The rated primary current of the current transformer is generally selected according to the current of 1.2~1.4 times of the line. This is mainly to consider that the electric equipment such as the -

2023-4-17Minor problems that may arise in current transformer applications
1) The insulation of the leakage current transformer is very thick, and some insulation is loosely wrapped, and there are wrinkles between the insulation layers. In addition, the vacuum treatment is p -

2023-4-14How to choose AC current transformer?
AC current transformer is a kind of thing commonly used by electricians, and it is also something commonly used by scientific researchers. In addition, this kind of equipment is also used in some fact -

2023-4-12Principles of use of split current transformers
1) The wiring of the current transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, while the secondary winding should -

2023-4-10Principles and methods of current transformer selection
1. Rated voltage The rated voltage of the current transformer should be greater than the rated voltage of the line at the installation point. 2. Ratio The current IC should be calculated according to -

2023-4-07Installation, use and wiring inspection of current transformers
(1) The installation of current transformers depends on the configuration of the equipment. Generally, there are the following situations: ① Install the current transformer on the metal frame. Electri -

2023-4-05Precautions for installation of zero sequence current transformer
1. Problems in installation (1) Zero-sequence current transformer'>The current transformer should be installed on the bottom plate of the switch cabinet, and should be fixed by a reliable bracket. -

2023-4-03The difference between zero sequence current transformer and current transformer
1. Different methods of use The zero-sequence current transformer is used to detect the zero-sequence current. Generally, all three live wires are passed through the inner hole of the transformer, and


