-

2023-6-14The difference between ordinary current transformer and zero sequence current...
1. The role of ordinary current transformers Ordinary current transformers can convert the primary current with a large value into a secondary current with a small value through a certain transformati -

2023-6-12Use of current transformers
1) The wiring of the current transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, while the secondary winding should -

2023-6-09Operation and maintenance management of residual current transformer
(1) After the residual current transformer is put into operation, the user should establish operation records and corresponding management systems (2) Power management personnel conduct a power-on tri -

2023-6-07Why can't the secondary side of the current transformer be open?
1. The original current is determined by the detection circuit. When the load resistance is different, the initial current is also different. In normal operation, the secondary pole of the current tra -

2023-6-05How to install the current transformer
1. Construct according to the drawing, the line wiring is accurate, the number marks at both ends are clear, and the label range meets the specified requirements. 2. The conductors or cables of the se -

2023-6-02Problems that should be paid attention to in the operation of current transfo...
1. The secondary side of the current transformer must not be open-circuited during operation. Once the secondary side is open-circuited, it will be burned due to excessive iron loss and high temperatu -

2023-5-31Function and characteristics of indoor current transformer
The magnitude of the current in the power supply line is different. In order to facilitate the use of instruments and meters, it is necessary to convert different currents into consistent currents, so -

2023-5-29Common current transformer faults and solutions
1. Abnormal noise or overheating of iron core Cause of failure: When the current transformer is in operation, if there is an open circuit or overload in the secondary circuit, it will cause abnormal s -

2023-5-26Inspection and installation steps of voltage transformer
1. Check whether the porcelain sleeve of the product has cracks, whether the edge is smooth, whether there are burrs, roughness, damage, etc., and try to see if the glue between the porcelain tube and -

2023-5-24The working principle, usage method and precautions of current transformer
working principle: The working principle of the transformer is based on electromagnetic induction. It consists of a primary coil and a secondary coil. The primary coil is wound on the wire through whi -

2023-5-03What causes the current transformer to burn out
The first reason is that the secondary side of the current transformer is caused by an open circuit due to weak wiring. In the process of using the current transformer, if the secondary side is open d -

2023-5-01How to deal with the current transformer error exceeding the standard
The secondary load of the current transformer directly affects its correct operation. Generally speaking, the greater the secondary load, the greater the error of the transformer. As long as the secon


