-

2021-12-14How to operate Electrical Current Transformer safely?
The iron core of the Electrical Current Transformer is made of laminated silicon steel sheets. Its primary coil is connected in series with the main circuit, and through the measured current I1, it ge -

2021-12-13What is the fault handling procedure for current transformers?
(1) When the current transformer is found to have secondary open circuit, internal abnormal sound, serious oil leakage, temperature rise or smoke, etc., the power should be cut off for inspection and -

2021-12-12The difference in the principle of action between a voltage transformer and a...
1) Electrical Current Transformer can be short-circuited for the second time, but must not be open; the voltage transformer can be opened for the second time, but must not be short-circuited; 2) Compa -

2021-12-11The main factors affecting the error of Electrical Current Transformer
(1) The influence of primary current. When the primary current of the Electrical Current Transformer is very small, the error caused will increase; when the primary current is longer than the rated cu -

2021-12-10How to choose Electrical Current Transformer?
(1) The rated primary current should be within the range of 20% to 120% of the operating current. (2) The rated primary voltage of the Electrical Current Transformer is the same as the operating volta -

2021-12-09Equipment required to verify Electrical Current Transformer
1. Transformer calibrator: Measure the error between the standard transformer and the tested transformer, and display the working current. 2. Standard Electrical Current Transformer: It is used as a s -

2021-12-08Reasons for electrical current transformer burnt during use
The Electrical Current Transformer is open for a second time, generating high voltage, and the Electrical Current Transformer is burned out; if the use time is too long, the insulation is aging, local -

2021-12-07How to avoid electrical current transformer burning
First install a circuit breaker to avoid branch faults from spreading to the entire line of power outages, especially to ensure that the branch circuit breakers can be reliably tripped. Then connect t -

2021-12-06Method for determining saturation point of Electrical Current Transformer
Obviously, the direct test method is to take the actual load on the secondary side, pass in the current from the primary side, and observe the secondary current to find the saturation point of the Ele -

2021-12-05Why does Electrical Current Transformer develop so well
Now the Electrical Current Transformer produced with new synthetic materials is of high quality, safe and practical, and wear-resistant, aging-resistant, high pressure bearing, strong pressure transfo -

2021-12-04What are the precautions for the operation of Electrical Current Transformer?
The secondary side of the Electrical Current Transformer must not be open during operation. Once the secondary side is open, it will burn out due to excessive iron loss and high temperature, or the vo -

2021-12-03The structure and function of Electrical Current Transformer
Electrical Current Transformer plays an important function and role in the power supply system. Its basic structure is composed of iron core, primary winding, secondary winding, terminal and insulatin


