-

2021-12-02Principles of Using Electrical Current Transformer
1) The wiring of the Electrical Current Transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, and the secondary windin -

2021-12-01Electrical Current Transformer4 large internal parameters affect the error
1. The influence of the internal resistance of the secondary coil R2 and the leakage reactance X2 on the error: when R2 increases, the ratio difference and the angle difference increase; when X2 incre -

2021-11-30Principles of using Power Current Transformer
1) The wiring of the Power Current Transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, and the secondary winding sho -

2021-11-29How to install and use Power Current Transformer
(1) The installation of Power Current Transformer, depending on the equipment configuration, has the following situations: ① Install the Power Current Transformer on the metal frame. ②In the place whe -

2021-11-28Power Current Transformer error compensation method
1) The insulation of the Power Current Transformer is very thick, some of the insulation is loosely wrapped, there are wrinkles between the insulation layers, and the vacuum treatment is poor, and the -

2021-11-27The role of Power Current Transformer
In order to ensure the safe and economic operation of the power system, the operation of the power equipment must be monitored and measured. However, the general measurement and protection devices can -

2021-11-26Prevention of Open Circuit of Secondary Circuit of Power Current Transformer
(1) The secondary circuit of Power Current Transformer is not allowed to install short-circuit protection devices such as fuses; (2) The secondary circuit of the Power Current Transformer generally do -

2021-11-25Pay attention to the daily use of Power Current Transformer
1. Power Current Transformer polarity connection must be correct The Power Current Transformer generally reduces the polarity mark. If the polarity is incorrectly connected, it will affect the measure -

2021-11-24Power Current Transformer operation maintenance and inspection
1) Regularly check the Power Current Transformer for overheating, check the wiring terminals for discoloration, and check for sundries in the terminal box. 2) Check the oil level gauge for oil leakage -

2021-11-23Several requirements to consider when choosing Power Current Transformer
(1) Rated current on the secondary side. The rated current of the primary side should usually be 1~1.3 times of the load current during normal operation. (2) Rated voltage. The rated voltage should be -

2021-11-22Detection and treatment measures for common faults of Power Current Transformer
1. Deal with abnormal sound or iron core overheating. During the operation of the Power Current Transformer, if the secondary circuit is open or overloaded, abnormal sound will be generated or the iro -

2021-11-21Saturation impact measures of Power Current Transformer for protection
1. The protection device takes measures to reduce the saturation impact of the Power Current Transformer for protection Power Current Transformer has developed a series of protection devices that can


