-

2021-12-30Wiring form of Power Current Transformer
1. It is the wiring form of a single Power Current Transformer. It can only reflect the situation of single-phase current, which is suitable for the situation where one-phase current or three-phase lo -

2021-12-29Causes of overheating of secondary terminals of Power Current Transformer
The reason for the overheating of the secondary terminals of Power Current Transformer: When the shorting lugs of the secondary terminals of the Power Current Transformer that are not connected to the -

2021-12-28The form of Electrical Current Transformer in today's situation
The transformer level and accuracy level have been greatly improved, and many special transformers have been developed, such as voltage and current composite transformers, DC Electrical Current Transf -

2021-12-27Demagnetization inspection of Electrical Current Transformer
Electrical Current Transformer may produce residual magnetism in the transformer core when the current drops suddenly. For example, the Electrical Current Transformer suddenly cuts off the power suppl -

2021-12-26Common faults of Electrical Current Transformer
1) The insulation of the Electrical Current Transformer is very thick, and some insulation is loosely wrapped, and there are wrinkles between the insulation layers. In addition, poor vacuum treatment -

2021-12-25What problems should be paid attention to in daily use of Electrical Current ...
One, the electrical current transformer polarity connection must be correct Electrical Current Transformer generally reduces the polarity mark. If the polarity is not connected correctly, it will affe -

2021-12-24Common faults of Electrical Current Transformer
1. The thickness of the insulation part of the Electrical Current Transformer is relatively large, and some insulation layers also have wrinkles, the insulation part is wrapped and loose, and the vacu -

2021-12-23Electrical Current Transformer configuration requirements
1) The configuration of the Electrical Current Transformer should try to avoid the dead zone of the main protection. When the protection is connected to the secondary winding of the transformer, it sh -

2021-12-22Precautions during the use of Electrical Current Transformer
Usually when using Electrical Current Transformer, pay attention to whether the current is below the rated current standard. This is one of the most important issues when using a transformer. If the c -

2021-12-21Common Faults of Electrical Current Transformer
1 Treatment of abnormal movement or overheating of the iron core During the operation of the Electrical Current Transformer, assuming that there are problems such as open circuit or overload in the se -

2021-12-20How to use Electrical Current Transformer correctly
1. The wiring of the Electrical Current Transformer should follow the principle of series connection, that is, the primary winding should be connected in series with the circuit under test and the sec -

2021-12-19Things to keep in mind when using Electrical Current Transformer
First of all, we must ensure that the polarity connection of the Electrical Current Transformer is correct, otherwise the measurement will be affected, especially when multiple Electrical Current Tran


