-

2023-1-07What does a current transformer do
1. Function The main function of the current transformer is to convert the large current in the AC circuit into a certain proportion of small current (the Chinese standard is 5 amperes), which is used -

2023-1-05What should be paid attention to when installing current transformers
1. The polarity of the current transformer cannot be reversed. The phase sequence and phase should meet the design and regulation requirements. For the transformer connection of differential protectio -

2023-1-03Analysis of design points of current transformer
Current transformers have long been used as standard units in instruments that measure precision current. Even in harsh environments and high temperatures, the device is very accurate and easy to use. -

2023-1-01The role of current transformer in variable frequency power supply
(1) Isolate the high voltage circuit. There is no electrical connection between the primary and secondary sides of a current transformer, only a magnetic connection. The secondary device is isolated f -

2022-12-30What is the function of the current transformer on the neutral line
The main function of the current transformer on the neutral line is to detect the current in the actual operation of the neutral line circuit. This current transformer works in the same way as the nor -

2022-12-28Why can't the secondary side of the current transformer be open?
1. The original current is determined by the detection circuit. When the load resistance is different, the initial current is also different. In normal operation, the secondary pole of the current tra -

2022-12-26How to install the current transformer
1. The construction shall be carried out according to the drawings, the wiring of the lines shall be accurate, the number marks at both ends shall be clear, and the range of the labels shall meet the -

2022-12-23Permissible operating modes of current transformers
(1) Allowable operating capacity. The current transformer should operate within the rated capacity specified on the nameplate. If the operation exceeds the rated capacity of the nameplate, the accurac -

2022-12-21Patrol Inspection of Current Transformer Operation
(1) Check that the porcelain part should be clean, free from damage, cracks, and discharge traces. (2) Check that the oil level should be normal, the oil color should be transparent and not black, and -

2022-12-19Correct installation method of current transformer
Where the busbar passes through the wall or floor, fix the current transformer directly on the wall or floor with foundation screws, or first make an angle iron into a rectangular frame and embed it i -

2022-12-16Current Transformer Installation Precautions
1. The polarity of the current transformer cannot be reversed. The phase sequence and phase should meet the requirements of the design and regulations. For the connection of the transformer used for d -

2022-12-14The wiring principle of current transformer
1. The secondary side of the current transformer is not allowed to open. The secondary open circuit may have serious consequences. One is that the iron core is overheated, and even the transformer is


