-

2022-7-01Problems needing attention in the operation of current transformer
1. The secondary side of current transformer shall not be open circuit during operation. Once the secondary side is open circuit, it will be burnt due to excessive iron loss and high temperature, or t -

2022-6-27Common Failure Root Causes of Power Current Transformers
1) The Power Current Transformer has thick insulation, loose insulation coating, wrinkles between insulation layers, poor vacuum treatment, incomplete impregnation, resulting in air-containing voids, -

2022-6-26Insulation resistance measurement of Power Current Transformer
1. Cut off the switching power supply of the sample, disassemble or disconnect all the connections open to the outside world, and charge and discharge the sample to the ground. When charging and disch -

2022-6-25Problems in using Power Current Transformer
1 Reason for failure (1) Due to structural and quality defects, the screw is in poor contact with the screw hole of the insert during operation, resulting in an open circuit; (2) Because the connectin -

2022-6-24What are the operating methods of Precision Current Transformer
1. The wiring of high-precision current transformers should follow the series connection standard. That is, one decompression is connected to the power circuit under test and the second decompression -

2022-6-23Influence of Power Current Transformer on Relay Protection
1. The important role of Power Current Transformer The most obvious function of the Power Current Transformer is that it can convert the primary current of a large output power into several secondary -

2022-6-22Points to note when connecting Power Current Transformers in series
The wiring of the Power Current Transformer should follow the basic principle of series connection: the primary winding should be connected in series with the power supply circuit under test, and the -

2022-6-21Matters related to Power Current Transformer failure
1) The insulation of the Power Current Transformer is thick, some of the insulation wraps are slack, and the insulating virtual beam has wrinkles. In addition, the vacuum pump is not well solved, and -

2022-6-20Power Current Transformer Wiring Inspection
(1) In order to find out whether there are common faults such as disconnection and short-circuit faults on the secondary side of the Power Current Transformer, the wires connected to the A-phase volta -

2022-6-19Why can't the Power Current Transformer in the miniature transformer be a vol...
When it comes to the Power Current Transformer in the micro-transformer, it cannot be used as a voltage transformer, because the essential difference between the Power Current Transformer and the volt -

2022-6-18Circuit Break Prevention for Power Current Transformer
In electrical safety work, the Power Current Transformer secondary circuit must have an approved grounding device according to the requirements specified in the technical specification. This is to bet -

2022-6-17The difference between ordinary current transformer and Zero Sequence Current...
1. The role of ordinary current transformers Ordinary current transformers can convert a larger value of primary current into a smaller value of secondary current through a certain transformation rati


