-

2022-5-17How to measure the polarity of Power Current Transformer
1 DC method Use a 1.5~3V dry battery to connect its positive pole to the primary coil L1 of the transformer, and L2 to the negative pole. The secondary side K1 of the transformer is connected to the p -

2022-5-16Operation and Maintenance of Power Current Transformer
During operation, the secondary circuit of the Power Current Transformer may be opened by the terminal screws due to vibration, etc., causing the secondary circuit to open. If the Power Current Transf -

2022-5-14Reasons for overheating of secondary terminals of Power Current Transformer
The reason for the overheating of the secondary terminals of the Power Current Transformer: When the shorting piece of the secondary side terminal of the Power Current Transformer that is not connecte -

2022-5-13Power Current Transformer Explosion Precautions
(1) Check whether the lead connector in the primary terminal of the transformer is in good contact The primary terminal lead joint of the Power Current Transformer should be in good contact and the co -

2022-5-12How to avoid Power Current Transformer burning?
First, install circuit breakers to avoid branch faults from affecting the entire line, especially to ensure reliable tripping of branch circuit breakers. Then connect the Power Current Transformer to -

2022-5-11How to prevent explosion of miniature current transformer
To prevent the explosion of the miniature current transformer, first of all, when the test value is abnormal, the cause should be found out. When the dielectric loss factor tg value measured before an -

2022-5-10Matters needing attention in the operation of miniature current transformers
The secondary side of the current transformer must not be opened during operation. Once the secondary side is opened, it will be burnt due to excessive iron loss and high temperature, or the voltage o -

2022-5-09Wiring and Fixing Principle of Miniature Current Transformer
The wiring of the current transformer should follow the series principle: the primary winding should be connected in series with the circuit under test, and the secondary winding should be connected i -

2022-5-08Wiring principles and precautions of current transformers
The wiring principle of current transformer: 1. Open circuit is not allowed; secondary open circuit can easily lead to safety accidents, because the secondary open circuit will cause the iron core to -

2022-5-07Whether there is a fault in the secondary open circuit of the current transfo...
1. Whether the current transformer body has abnormal noise, whether the vibration is uneven, whether there is smoke and heat, etc., but these symptoms are not obvious when the load is relatively small -

2022-5-06What should be paid attention to when connecting miniature current transforme...
The wiring of the miniature current transformer should follow the series principle: the primary winding should be connected in series with the circuit under test, and the secondary winding should be c -

2022-5-05How to deal with the secondary open circuit fault in the miniature current tr...
1. When we see the secondary open circuit of the current transformer, first distinguish which current loop is, and then judge the phase of the open circuit to see if it affects the protection, and the


