-

2021-10-16What problems should be paid attention to during the use of Electrical Curren...
①The secondary side of the Electrical Current Transformer must not be open during operation. Once the secondary side is open, it will burn out due to excessive iron loss and high temperature, or the v -

2021-10-15Electrical Current Transformer wiring inspection method
1. In order to check whether the secondary side is disconnected or short-circuited, disconnect the wires connected to the phase A voltage terminal and the phase C voltage terminal of the electric ener -

2021-10-14How to use Electrical Current Transformer?
1) The wiring of the Electrical Current Transformer should follow the series principle: that is, the primary winding should be connected in series with the circuit under test, and the secondary windin -

2021-10-13Reasons for the secondary side grounding of the Electrical Current Transformer
Since the primary winding and the secondary winding of the Electrical Current Transformer are connected in series in the primary loop and the secondary control loop respectively when working, the work -

2021-10-12Principle of residual current transformer
Residual current transformer is often used in conjunction with residual current electrical fire monitoring detectors for the detection of leakage current (ie residual current). It is a special transfo -

2021-10-11Correct use of Electrical Current Transformer
1. The wiring of Electrical Current Transformer should follow the series principle: the primary winding should be connected in series with the circuit under test, and the secondary winding should be c -

2021-10-10Electrical Current Transformer failure problem
1) The insulation of the Electrical Current Transformer is very thick, and some insulation is loosely wrapped, and there are wrinkles between the insulation layers. In addition, the vacuum treatment i -

2021-10-09Wiring principle of Electrical Current Transformer
1. No open circuit is allowed. The secondary open circuit can easily lead to safety accidents, because the secondary open circuit will cause the iron core to overheat and induce high voltage. 2, there -

2021-10-08Precautions for Use of Electrical Current Transformer
1. Generally speaking, the electrical current transformer is connected according to the minus polarity, so the polarity connection must be correct. Once the connection is wrong, the measurement will b -

2021-10-07The difference between Electrical Current Transformer and Zero Sequence Curre...
1. Electrical Current Transformer and Zero Sequence Current Transformer use different methods. Zero Sequence Current Transformer is used to detect zero sequence current. Generally, all three live wire -

2021-10-06Daily maintenance of residual current transformer
The maintenance and maintenance of the residual current transformer is a necessary condition to ensure normal, safe and reliable operation. Electrical equipment maintenance work can be divided into da -

2021-10-05Wiring form of Electrical Current Transformer
1. It is the wiring form of a single Electrical Current Transformer. It can only reflect the situation of single-phase current. It is suitable for the situation where one-phase current or three-phase


