-

2021-10-28Detection and treatment measures for common faults of Electrical Current Tran...
1. Deal with abnormal sound or iron core overheating. During the operation of the Electrical Current Electrical Current Transformer, if the secondary circuit is open or overloaded, it will produce abn -

2021-10-27Operation and maintenance of Electrical Current Transformer and voltage trans...
1. Operation of Electrical Current Transformer and Voltage Transformer The operation of Electrical Current Transformer changes the current amplitude by changing the number of turns of the primary and -

2021-10-26Precautions in the operation of Electrical Current Transformer
The secondary side of the Electrical Current Transformer must not be open during operation. Once the secondary side is open, it will burn out due to excessive iron loss and high temperature, or the vo -

2021-10-25Electrical Current Transformer wiring principles and precautions for use
Wiring principle of Electrical Current Transformer 1. No open circuit is allowed. The secondary open circuit can easily lead to safety accidents, because the secondary open circuit will cause the iron -

2021-10-24The purpose of Electrical Current Transformer and precautions when using it
The working principle of Electrical Current Transformer is similar to that of transformer, and its main structure is composed of iron core, primary winding, secondary winding, lead wire, and insulatio -

2021-10-23The difference between Electrical Current Transformer and voltage transformer
1. There is a certain difference in the structure between them. Electrical Current Transformer is generally made of thick wire. It should be used in series with the load that measures the current. The -

2021-10-22What to do if the Electrical Current Transformer gets damp
(1) Oven drying method. The specific operating procedures of the oven drying method are as follows: 1. First remove the secondary winding from the Electrical Current Transformer, and mark the secondar -

2021-10-21Characteristics and usage requirements of Electrical Current Transformer
1. Less primary turns and more secondary turns Electrical Current Transformer used in the power system, its primary winding is usually the incoming and outgoing wires of the primary equipment, with on -

2021-10-20Precautions for the use of high voltage Electrical Current Transformer
1. The secondary winding of the high-voltage Electrical Current Transformer is not allowed to be open, otherwise, high voltage will be generated, endangering the safety of equipment and operators. At -

2021-10-19Why the electrical current transformer cannot open the secondary circuit
1. The current on the secondary side has an unbalanced effect, which leads to a significant increase in the magnetic flux of the iron core. The induced electromotive force is proportional to the magne -

2021-10-18How to reduce the phase difference of Electrical Current Transformer
1. Installing a circuit breaker on the secondary side can make the Electrical Current Transformer safer and more reliable during operation, so the selection of the circuit breaker must be appropriate. -

2021-10-17How to use Electrical Current Transformer correctly
1. The wiring of the Electrical Current Transformer should follow the principle of series connection, that is, the primary winding should be connected in series with the circuit under test and the sec


