-

2025-8-08How to properly install and use a current transformer?
1. Pre-installation Preparation Power-off Operation: Before installation, disconnect the power supply. Wear insulating gloves and safety glasses. Check the transformer's appearance and specificati -

2025-8-06How to ensure that the ratio test of the current transformer is within the al...
1. Preparation before testing 1. Disconnect the load: Disconnect the load on the secondary side of the current transformer to ensure the safety of the test environment. 2. Check the equipment: Make su -

2025-8-04How to regularly inspect and maintain the current transformer?
1. Regular inspection 1. Appearance inspection: Regularly check whether the shell of the current transformer has cracks, deformation or corrosion, especially whether the insulation part is intact. At -

2025-8-01Does the overloaded current transformer need to be replaced immediately?
1. Determine whether it needs to be replaced immediately 1. Check the cause of the overload If the overload is caused by a temporary increase in load and the equipment is not obviously damaged, it can -

2025-7-30What should I do when the temperature of the current transformer is abnormal?
1. Preliminary judgment 1. Observe the phenomenon: Carefully observe the appearance of the current transformer to see if there are obvious signs of overheating, such as surface discoloration, smoke, b -

2025-7-28What are the maintenance tips for current transformers?
Daily maintenance 1. Appearance inspection: Regularly check the appearance of the current transformer to see if the shell is damaged, deformed, corroded, etc. At the same time, check whether there is -

2025-7-25Common faults and treatment methods of current transformers
1. Insulation damage Cause: Long-term operation leads to insulation aging, or external force impact, etc. Treatment method: Replace damaged insulation parts, or replace the entire current transformer. -

2025-7-23What are the consequences of reverse polarity of current transformer?
1. Measurement 1. Increased measurement error When the polarity of the current transformer is reversed, the current direction output by the secondary winding is opposite to the actual primary current -

2025-7-21How to install the residual current transformer?
1. Choose a suitable installation location Easy to maintain: The residual current transformer should be installed in a place that is easy to maintain and as far away from strong magnetic fields as pos -

2025-7-18How is Hall Effect Sensor used in industrial automation?
1. Motor control Brushless DC motor (BLDC) control: Hall Effect Sensor is used to detect the position of the rotor in the magnetic field to achieve precise speed control. This precise control ensures -

2025-7-16How to detect oil leakage in current transformer?
1. Appearance inspection Check the oil level: Check the oil level of the current transformer regularly to ensure that it is within the normal range. A low oil level may indicate an oil leakage. Check -

2025-7-14What is the impact of oil leakage in current transformer on equipment?
1. Reduced insulation performance Insulating oil cracking: Oil leakage will cause insulating oil cracking, increase dielectric loss, and reduce insulation performance. Possible arc discharge: Severe o


