-

2025-6-23How to install a zero-sequence current transformer?
1. Select the installation location Installation location: The zero-sequence current transformer is usually installed at the neutral point of the power system to detect the zero-sequence current in th -

2025-6-20Common faults and solutions of Hall effect sensors
1. Abnormal output signal: Fault phenomenon: The output signal of the sensor is unstable or inaccurate. Solution: Check whether the power supply voltage of the sensor is stable, check whether the wiri -

2025-6-18How to check the insulation damage of the current transformer?
1. Appearance inspection: Observe whether the shell, insulation, coil, etc. of the current transformer have signs of aging, electric shock, burning, etc. 2. Insulation resistance test: Use a 500V mego -

2025-6-16What are the common faults of current transformers?
1. Insulation damage Fault phenomenon: Insulation damage may cause the current transformer to leak or even short-circuit. Solution: Check the insulation resistance regularly to ensure that it is withi -

2025-6-13How often should the current transformer be checked after grounding?
Specific inspection contents 1. Grounding wire inspection: Check whether the grounding wire is corroded, broken, etc., and whether the grounding terminal is loose. 2. Insulation inspection: Regularly -

2025-6-11Are there any special requirements for grounding the current transformer hous...
Grounding requirements 1. Housing grounding: The exposed metal part of the current transformer housing should be reliably grounded. 2. Capacitor-type insulated current transformer: The lead-out termin -

2025-6-09How to ensure grounding safety when installing a current transformer?
Grounding requirements 1. Capacitor-type insulated current transformer: The lead-out terminal of its end screen should be reliably grounded. 2. Current transformer housing: The housing of the current -

2025-6-06What safety issues should be paid attention to when installing a current tran...
Preparation before installation 1. Safety training: Ensure that all personnel involved in the installation work receive relevant electrical safety training, including but not limited to safety operati -

2025-6-04Common faults and solutions of current transformers
1. Insulation damage: Fault phenomenon: Insulation damage may cause leakage or even short circuit of the current transformer. Solution: Check the insulation resistance regularly to ensure that it is w -

2025-6-02How to detect the insulation resistance of the current transformer?
1. Preparation Record environmental conditions: record the ambient temperature and humidity at the test site, as these factors will affect the measurement results of the insulation resistance. Equipme -

2025-4-16How to choose the right model of current transformer?
1. Clarify the application scenario Measurement purpose: If used to measure current or electric energy, a current transformer with higher accuracy should be selected, such as 0.2 or 0.5. Protection pu -

2025-4-14What is the role of zero-sequence current transformer in power system?
1. Ground fault protection 1. Detect ground fault current: In a three-phase power system, when a single-phase ground fault occurs, the fault current will return to the power supply through the ground


