-

2025-4-11How to correctly install the zero-sequence current transformer?
1. Preparation before installation 1. Check the appearance of the transformer: Check whether the appearance of the zero-sequence current transformer is damaged, cracked or deformed, and ensure that it -

2025-4-09Precautions for zero-sequence current transformers
1. Avoid secondary open circuit: During operation, it is strictly forbidden to open the secondary side of the transformer, otherwise it may cause high voltage on the secondary side, endangering person -

2025-4-07How to install Split Core Current Transformers?
1. Preparation before installation 1. Confirm the model and specifications of the transformer: Confirm that the model and specifications of Split Core Current Transformers meet the requirements of the -

2025-4-04What environments are Split Core Current Transformers suitable for?
1. Applicable environment 1. Indoor environment Temperature range: -30℃ to 70℃, maximum temperature resistance can reach 120℃. Suitable for use in indoor environments with large temperature difference -

2025-4-02How does the Hall Effect Sensor maintain its performance at low temperatures?
1. Graphene Hall Effect Sensor Graphene Hall Effect Sensor exhibits excellent performance at low temperatures due to its unique material properties. Graphene has high electron mobility and low noise c -

2025-3-31What are the installation methods of General Used Current Transformer?
1. Through-type installation Through-type current transformers are used in situations where they pass through a screen or wall. Their design allows the primary conductor to pass directly through the c -

2025-3-28How to check whether the current transformer is saturated?
1. On-site detection method 1. Excitation characteristic test The excitation characteristic test is a common method to check whether the current transformer is saturated. By measuring the relationship -

2025-3-26How to prevent false operation of current transformer?
1. Equipment selection and installation 1. Reasonable selection of current transformer Ratio selection: Select the appropriate ratio according to the actual load current to ensure that the primary cur -

2025-3-24How does General Used Current Transformer protect the power system?
1. Provide fault current signal 1. Overcurrent protection: When an overcurrent fault (such as short circuit, overload, etc.) occurs in the power system, the primary current will increase sharply. Gene -

2025-3-21How to regularly check the secondary circuit of the current transformer?
1. Appearance inspection Check the wiring terminals: Check whether the secondary wiring terminals are loose, oxidized or corroded. Loose wiring may cause poor contact, heating or sparking. Check the i -

2025-3-19How to prevent the current transformer from saturation?
1. Reasonably select the transformation ratio of the current transformer Select the transformation ratio according to the actual load current When selecting a current transformer, the appropriate tran -

2025-3-15What protection functions does a current transformer have?
1. Overcurrent protection The current transformer converts the large current on the primary side into a small current on the secondary side for use by the overcurrent protection device. When an overcu


